IWR1642 ES1.0 特殊配置

中文

这部分来自 OpenRadar 的 ES1_SETUP.md，针对 IWR1642BOOST ES1.0 这种较早版本开发板。原文重点是提醒：这类板卡往往不能直接使用较新的 SDK 和 CCS 版本。

核心限制

• ES1.0 版本通常需要较旧的 MMWAVE-SDK
• 新版 Code Composer Studio 可能无法正常导入或编译工程
• 需要匹配的 mmWave Radar Device Support

原文建议的旧版组合

• MMWAVE-SDK 1.2 / 1.02
• CCS 7.1
• Industrial Toolbox 2.2.0

适用提醒

如果你现在的工作重点是 IWR6843 或更新平台，这部分更多是历史兼容经验；但如果需要复用旧版 IWR1642 硬件，这些版本约束仍然有参考价值。

English

This page summarizes OpenRadar's ES1_SETUP.md, which targets the older IWR1642BOOST ES1.0 board revision. The main point is that these boards often require older TI toolchain versions.

Core constraints

• ES1.0 boards usually need an older MMWAVE-SDK
• Newer Code Composer Studio releases may fail to import or build the project
• Matching mmWave Radar Device Support is required

Versions recommended in the original notes

• MMWAVE-SDK 1.2 / 1.02
• CCS 7.1
• Industrial Toolbox 2.2.0

Relevance today

If your main target is IWR6843 or a newer platform, treat this page as legacy compatibility guidance. It becomes relevant again when you need to support an older IWR1642 ES1.0 board.